-40%
Iridium 9601 SBD Transceiver ✴Brand New✴
$ 155.76
- Description
- Size Guide
Description
This item is new,has never been activated with the network and
in original manufacturer's packaging.
Overview:
The Iridium 9601 combines the global coverage of the Iridium satellite constellation with the low latency of the Iridium Short Burst Data (SBD) Service.
The Iridium 9601 is ideal for Iridium registered partners requiring a transceiver for applications specific to the Iridium SBD Service. The Iridium 9601 integrates into a final Iridium subscriber solution for a specific application or vertical market, such as a vehicle or maritime vessel tracking solutions.
The Iridium Short-Burst Data (SBD) Service provides:
Mobile Originated messages (up to 340 bytes)
Mobile Terminated messages (up to 270 bytes)
Low, uniform global latency (less than 1 minute)
How It Works:
The 9601 only supports Iridium’s Short Burst Data (SBD) capability; it does not support voice, circuit switched data or short message service (SMS). The 9601 is approved by the FCC, Industry Canada, and the CE, assuming an antenna with a gain of ~3Bi and adequate shielding. This allows the 9601 to be integrated into a variety of wireless data applications or retrofitted into existing SBD-only applications using Iridium 9522 L-Band Transceiver-based products.
The 9601 is a single board core transceiver and is provided as a “black box”, with all device interfaces provided by a single multi-pin interface connector, in addition to the antenna connector. All other end-user Field Application functions such as GPS, microprocessor-based logic control, digital and analog inputs, digital and analog outputs power supply and antenna must be provided by the solution developer. The device interface consists of the serial interface, power input, network available output and power on/off control line. The 9601 does not incorporate nor require a Subscriber Identity Module (SIM card) to be inserted into the transceiver. The 9601 complies with the standards for Radio Emissions Compliance, Electromagnetic Compatibility and AC Safety in the United States, the European Union and Canada.
Technical Specifications:
Global coverage
Small form factor
340 bytes per message
Single Header Connector for:
- Power
- On/Off Control
- RS232 9-wire Interface
- Network Availability
SMA Antenna Connector to connect to small omni-directional L-Band antennas
Simple AT Command Interface
Mechanical
Length (without antenna connector): 106.4 mm
Width: 56.2 mm
Height: 13 mm (not including user interface connector)
Weight: 117g
Environmental
Operating temperature range: –35°C to +70°C
Operating humidity range: < 75% RH
Storage temperature range: –40°C to +85°C
Storage humidity range: < 93% RH
RF Interface
Frequency range: 1616MHz to 1626.5MHz
Duplexing method: TDD (Time Domain Duplex)
Oscillator stability: ± 1.5ppm
Antenna VSWR: 1.5:1 (50 ohms)
Multiplexing method: TDMA/FDMA
DC Power Interface
Main input voltage: Nominal: 5.0 V DC ± 0.5V DC
Ripple: 40 mVpp
Peak input current @ 5V (maximum): 1.5 A
Input current @ 5V (average) 350mA
Input standby current @ 5V (average): 66 mA