ER11M Collet Clamping Nuts for CNC Milling Chuck Holder Lathe Tool chuck

Description

We also sell machine tools such as End Mill Tool Holder、PULL STUD, so the more you buy, the more favorable.Welcome to store!!!
ER11M Collet Clamping Nuts for CNC Milling Chuck Holder Lathe Tool chuck
Condition:
100% Brand New & High Quality
Size:
As Picture
Fitment:
For for ER collet milling CNC chuck holder.
Specification:
Model:
ER11M
Material:
Carbon steel
Feature：
Hardened and precision ground.
High strength and hardness.
Durable in use.
Mounting and Removing:
1.Place collet into the clamping nut at an angle and turn the nut slightly to engage with the extractor spiral in collet groove. And then push the collet evenly into the nut in the directions of the arrows.
2.The cutter / router bit may be fitted now and the assemblies tightened hard into the chuck body by using a collet wrench.
3.To remove the cutter / router bit, slacken and undo the nut until resistance is felt. Then, using a collet wrench, further undo the nut until the collet is released from the chuck body. Removal of the collet from the nut is the reverse of the mounting procedure.
Please note:
1、Please don't tighten the nut down before insert the cutter / router bit. Or you will damage the collet.
2、You need to tighten the nut down, but not over-tighten. Or you will damage the collet.
Package Include:
1 x ER11M type Clamping Nut
The item is brand new but it might have some scratches during the transportation. Please understand that.
BUMT0178
1. Paypal, Visa, and MasterCard are the accepted forms of payment.
2. We ship to your eBay or PayPal Please make sure your eBay and PayPal address is correct before you pay.
3. Please be kind to contact us to cancel the order if you can’t pay in time or don’t want the item any more.
1. Shipment will be made within 3 working days once your payment has been cleared.
2. Delivery time depends on destination and other factors. For faster shipping methods like UPS, USPS, etc., please contact us to know the extra charges.
Your satisfaction is our long term pursuit and up-most concern. Please inspect your delivery immediately it arrives and notify us if there are any problems.
1.  Please kindly help to test the items again in order to eliminate improper use factor.
2.  Refund will be issued once returned item received.
3. If you satisfy with our product and service, please leave positive feedback, We appreciate your positive feedback.
4.  Please email us before leaving any negative feedback or opening any dispute on the site.We understand the concerns you might have and we will try our best to resolve the problem for you.
Your satisfaction is our long term pursuit and up-most concern. If you want to get in touch with us, it is preferable that you email us. We will try to answer most emails within 2 days.
Certain images/photos are the copyrighted property of JupiterImages and are used with permission under license.
Condition:
100% Brand New & High Quality
Size:
As Picture
Fitment:
For for ER collet milling CNC chuck holder.
Specification:
Model:
ER11M
Material:
Carbon steel
Feature：
Hardened and precision ground.
High strength and hardness.
Durable in use.
Mounting and Removing:
1.Place collet into the clamping nut at an angle and turn the nut slightly to engage with the extractor spiral in collet groove. And then push the collet evenly into the nut in the directions of the arrows.
2.The cutter / router bit may be fitted now and the assemblies tightened hard into the chuck body by using a collet wrench.
3.To remove the cutter / router bit, slacken and undo the nut until resistance is felt. Then, using a collet wrench, further undo the nut until the collet is released from the chuck body. Removal of the collet from the nut is the reverse of the mounting procedure.
Please note:
1、Please don't tighten the nut down before insert the cutter / router bit. Or you will damage the collet.
2、You need to tighten the nut down, but not over-tighten. Or you will damage the collet.
Package Include:
1 x ER11M type Clamping Nut
The item is brand new but it might have some scratches during the transportation. Please understand that.
BUMT0178